(1) Vendor needs to provide video detection system for the traffic management system to the government authority located in Lincoln, NE.
- The video detection system shall include a video sensor that integrates a high-definition camera with an embedded processor for analyzing the video and performing detection.
- The camera shall be a color camera with resolution of at least 1280x720 pixels and 10X zoom.
- It shall be possible to zoom the camera remotely as required to satisfy detection objectives, including stop line and advance detection.
- The camera shall have direct, real-time iris and shutter speed control by the integrated processor.
- The processor shall support H.264 video compression for streaming output.
- The camera and processor shall be housed in a sealed IP-67 enclosure.
- The faceplate of the enclosure shall be glass and shall have hydrophilic coating on the exterior surface to reduce debris accumulation.
- The faceplate shall have a thermostatically-controlled indium tin oxide heater applied directly on the interior surface to keep the faceplate clear of condensation, snow, ice and frost.
- An adjustable aluminum visor shall shield the faceplate from the sun and extraneous light sources.
- A removable rear cap, tethered to the enclosure, and cable strain relief shall seal the power connection.
- The rear cap shall be fastened to the body of the video sensor with a single, captive bolt.
- The video sensor shall operate normally over an input voltage range of 89 to 265 at 50 or 60 Hz.
- Power consumption shall be no more than 16 watts typical with no supplemental surge suppression required outside of the cabinet.
- video detection system shall include an interface panel in the traffic cabinet that manages communications between the video sensors, the traffic management center, a maintenance technician, and the traffic cabinet itself.
- An Ethernet port shall be provided to connect.
- The communications interface panel shall proxy all network requests that arrive on the connection to avoid unwanted network traffic from reaching the broadband-over-power network between the communications interface panel and the video sensors.
- All communications to the video detection system through the connection shall be to a single IP address
- Wi-Fi access point shall allow wireless connection to the video detection system at the cabinet for setup and maintenance purposes.
- The wi-fi access point shall operate simultaneously with the wired maintenance port and with the connection.
- All communications to the video detection system through the maintenance and wi-fi access points shall be to a single IP address each.
- The software shall be compatible with windows 7 and Windows 10 operating systems.
- The software shall communicate with the video detection system via ethernet.
- The management software shall automatically determine all video sensors and communications interface panels available on the local network and populate a list of all devices.
- The management software shall provide the user a means to name individual video sensors and communications interface panels.
- The management software shall provide a means for the user to zoom the camera optics while viewing a live video stream.
- The management software shall provide a means for the user to calibrate distances in the field of view.
- The management software shall provide the user a means to create four sided detection zones in the field of view using either a still snapshot or live video.
- The management software will overlay an outline of each detection zone over the background image.
- It shall be possible for the user to place detection zones anywhere in the field of view for stop line detection and advance detection.
- It shall be possible for the user to set the desired color of both the on and off states of the detection zone overlay.
- It shall be possible for the user to save all the settings for a video sensor or a communications interface panel to a laptop file.
- The management software shall provide a means to read or import all the settings from a previously saved configuration file for a video sensor or a communications interface panel.
- The management software shall be able to download a new version of the application software into a communications interface panel and its attached video sensors.
- The management software shall provide a screen to monitor operation of a video sensor.
↧